ALKA Interior Paint
1-Component, water-based acrylic Interior Low-Sheen Paint System
20L drum for $000 including GST.
Key Features
Alka Interior Paint is a premium quality, 100% pure acrylic-based Ultra Low Sheen finish for interior coating purposes. It possesses superior coverage on concrete, brick, fibre-cement board, masonry, etc. The product is easy to apply, has excellent coverage, and has low dirt pickup.
Alka Interior Paint is a coating specifically formulated for use on indoor surfaces such as walls, ceilings, and trim. It provides decoration, protection, and durability while enhancing the appearance of interior spaces.
Alka Interior paints are available in various finishes, including flat, low-sheen, satin, semi-gloss, and gloss, to suit different rooms and design preferences. They are designed to offer good coverage, colour retention, washability, and resistance to everyday wear and stains. Many modern interior paints are low in odour and volatile organic compounds (VOCs), making them suitable for occupied spaces. Common applications include homes, offices, schools, hospitals, and commercial buildings.
Where it could be used.
Timber, weatherboards, concrete, plaster, concrete blocks, brickwork, cement render, wallboard, PVC and cement sheets. Wallboard, Weatherboards, Concrete, Plaster, Concrete blocks, Brickwork, Cement render, Timber, PVC & Cement sheets. Designed for interior use in areas prone to high wear.
Benefits
- Reduces Drips and Splatter – Its thicker formula makes overhead painting easier and cleaner.
- Hides Imperfections – The flat or matte finish helps conceal cracks, patches, and uneven textures.
- Provides Good Coverage – Often covers stains and previous colours effectively, reducing the number of coats needed.
- Minimises Glare – Low light reflection creates a smooth, uniform appearance across the ceiling.
- Improves Room Brightness – White ceiling paint can make spaces feel brighter and more open.
- Saves Time and Effort – Designed specifically for ceilings, making application more efficient.
- Enhances Appearance – Gives ceilings a fresh, clean, and professional-looking finish.
- Specialised Options Available – Some products offer stain-blocking, mould-resistant, or moisture-resistant properties for challenging environments.
Packaging
4 Litre, 10 Litre, 15 Litre & 20 Litre
Colour
White & Tint bases.
Shelf life: 24 months
Storage conditions
Store away from direct sunlight and away from naked flames, sparks and heating.
Flash point >25 C
Density: 0.91 Kg/L
Dry time
Touch Dry in 30 minutes
Waiting time for overcoating
Recoat time – 2 hours
Consumption
Up to 10-12 sqm/L per coat. Practical coverage may depend on surface profile, method of application, and losses.
Coats – 2 to 3 normally
Surface Preparation
Use our Primer if you are painting over bare plasterboard, masonry, render, cement sheet, brick, MDF, and interior timber.
Remove all dirt, dust, and grease from the bare surface. If some mould or fungus is present on the surface, wash it with a commercially available bleaching agent and then treat with antifungal solution.
Fill cracks and imperfections with a suitable filler and spot prime.
All previously painted surfaces should be sanded to remove loose/flaking paint and to reduce the previous film to a flat finish.
Application
Brush, Roller, or Spray. Stir the contents thoroughly before and during use. Apply one or two uniform coats with light sanding in between using 220-grit sandpaper.
Dust off and follow with two finish coats. Care must be taken to maintain the wet edge when rolling large surfaces. When applying by spray application, back roll when wet to eliminate plaster set joint, smooth setting. Do not overroll as glancing light may affect the finished surface.
Thinning
Depending on the situation, you can mix 5% to max of 10%s water for easier application.
Protect our environment
– Do not wash painting equipment and allow waste to enter drains and waterways.
– Do not dispose of unwanted paint and thinners that will enter drains and waterways.
CLEANING OF EQUIPMENT
Clean immediately using solvent. Hardened product can only be removed mechanically.
Find the right product for you
Contact Us
Do you want to know more about our products and how we can help you? Leave your contact details here, and we’ll get in touch.
Alternatively, you can call us anytime on