ALKA Ceiling Paint
1-Component, water-based acrylic ceiling coating SystemAlka Ceiling Paint is a premium low-VOC ceiling paint that is designed with low splatter properties and dries to an ultra-flat finish. Formulated to provide high-opacity coverage on all living area ceilings. It is easy to apply, non-yellowing, and quick drying. Ideal for use in areas with high illumination, excellent for hiding surface imperfections.
20L drum for $000 including GST.
Key Features
• Decorative finish – Creates various textures and patterns, from subtle to heavily textured effects.
• Durability – Resists cracking, peeling, and weathering better than many traditional coatings.
• Flexibility – Acrylic resins allow the coating to expand and contract with building movement, reducing cracks.
• Water resistance – Helps protect surfaces from moisture penetration while remaining breathable.
• UV resistance – Maintains colour and appearance when exposed to sunlight.
• Low maintenance – Easy to clean and generally requires less frequent repainting.
Where it could be used.
Ceiling paint is primarily used on indoor ceilings in residential, commercial, and institutional buildings. It can be applied to ceilings made of plaster, drywall (gyprock), concrete, and textured surfaces, provided the surface is properly prepared. Common areas include living rooms, bedrooms, kitchens, hallways, offices, classrooms, and retail spaces. It performs best when used for its intended purpose—covering and protecting ceilings.
Benefits
Alka Ceiling Paint improve aesthetics, conceal surface defects, increases weather protection, and can extend the lifespan of building surfaces. They are commonly used where both decorative appeal and surface durability are desired.
Packaging
1L, 4L, 15 Litre
Colour
White / Flat
Shelf life: 24 months
Storage conditions
Store away from direct sunlight and away from naked flames, sparks and heating.
Flash point >25 C
Density: 0.91 Kg/L
Dry time
Touch Dry in 30 minutes
Waiting time for overcoating
Recoat time – 2 hours
Consumption
Up to 16 sqm/L per coat. Practical coverage may depend on surface profile, method of application, and losses.
Coats – 2 to 3 normally
Surface Preparation
Use our Primer if you are painting over bare plasterboard, masonry, render, cement sheet, brick, MDF, and interior timber.
Remove all dirt, dust, and grease from the bare surface. If some mould or fungus is present on the surface, wash it with a commercially available bleaching agent and then treat with antifungal solution.
Fill cracks and imperfections with a suitable filler and spot prime.
All previously painted surfaces should be sanded to remove loose/flaking paint and to reduce the previous film to a flat finish.
Application
Brush, Roller, or Spray. Stir the contents thoroughly before and during use. Apply one or two uniform coats with light sanding in between using 220-grit sandpaper.
Dust off and follow with two finish coats. Care must be taken to maintain the wet edge when rolling large surfaces. When applying by spray application, back roll when wet to eliminate plaster set joint, smooth setting. Do not overroll as glancing light may affect the finished surface.
Thinning
Depending on the situation, you can mix 5% to max of 10%s water for easier application.
Protect our environment
– Do not wash painting equipment and allow waste to enter drains and waterways.
– Do not dispose of unwanted paint and thinners that will enter drains and waterways.
CLEANING OF EQUIPMENT
Clean immediately using solvent. Hardened product can only be removed mechanically.
Find the right product for you
Contact Us
Do you want to know more about our products and how we can help you? Leave your contact details here, and we’ll get in touch.
Alternatively, you can call us anytime on