ALKA Trim Paint
1-Component, Water-Based Acrylic Trim Paint SystemAlka Super Trim is an ultra-premium, innovative water-based finish. A cross-linking pure acrylic gloss, developed to provide a durable, high-gloss, non-yellowing interior/exterior finish.
Alka Super Trim Gloss is a premium water-based acrylic gloss enamel designed for trim and high-contact surfaces. It is formulated with a cross-linking 100% acrylic binder, giving it a hard, durable, non-yellowing finish suitable for both interior and exterior use.
20L drum for $000 including GST.
Key Features
Alka Super Trim Gloss is a premium water-based acrylic gloss enamel designed for trim and high-contact surfaces. It is formulated with a cross-linking 100% acrylic binder, giving it a hard, durable, non-yellowing finish suitable for both interior and exterior use.
Where it could be used.
Alka Trim Paint is recommended for:
- Door frames
- Window frames
- Skirting boards
- Architraves
- Walls requiring a gloss finish
- Kitchens
- Bathrooms
- Laundries
- Other high-wear trim and joinery surfaces
Benefits
- High-Gloss Appearance – Provides a smooth, shiny finish that enhances the look of doors, trims, skirting boards, and joinery.
- Excellent Durability – Forms a hard-wearing coating that resists everyday wear, making it suitable for high-traffic and high-touch areas.
- Non-Yellowing – Maintains its original colour and gloss over time, unlike many traditional oil-based gloss paints.
- Water-Based Formula – Lower odour, easier cleanup with water, and generally more user-friendly than solvent-based enamels.
- Fast Drying – Dries quickly, allowing faster recoating and project completion.
- Good Washability – The glossy surface is easier to clean and maintain, making it ideal for kitchens, bathrooms, and laundries.
- Interior and Exterior Use – Suitable for a wide range of applications both inside and outside buildings.
- Good Flow and Finish – Designed to level out smoothly, helping achieve a professional-looking result with minimal brush marks.
- UV and Weather Resistance – Helps retain appearance and performance when exposed to sunlight and outdoor conditions.
- Low Maintenance – Its durable, washable finish reduces the need for frequent repainting and touch-ups.
Packaging
1L, 4L, 10 Litre
Colour
White, Deep, Ultra Deep, Extra Bright
Shelf life: 24 months
Storage conditions
Store away from direct sunlight and away from naked flames, sparks and heating.
Flash point >25 C
Density: 0.91 Kg/L
Dry time
Touch Dry in 30 minutes
Waiting time for overcoating
Recoat time – 2 hours
Consumption
Up to 16 sqm/L per coat. Practical coverage may depend on surface profile, method of application, and losses.
Coats – 2 to 3 normally
Surface Preparation
Use our Primer if you are painting over bare plasterboard, masonry, render, cement sheet, brick, MDF, and interior timber.
Remove all dirt, dust, and grease from the bare surface. If some mould or fungus is present on the surface, wash it with a commercially available bleaching agent and then treat with antifungal solution.
Fill cracks and imperfections with a suitable filler and spot prime.
All previously painted surfaces should be sanded to remove loose/flaking paint and to reduce the previous film to a flat finish.
Application
Brush, Roller, or Spray. Stir the contents thoroughly before and during use. Apply one or two uniform coats with light sanding in between using 220-grit sandpaper.
Dust off and follow with two finish coats. Care must be taken to maintain the wet edge when rolling large surfaces. When applying by spray application, back roll when wet to eliminate plaster set joint, smooth setting. Do not overroll as glancing light may affect the finished surface.
Thinning
Depending on the situation, you can mix 5% to max of 10%s water for easier application.
Protect our environment
– Do not wash painting equipment and allow waste to enter drains and waterways.
– Do not dispose of unwanted paint and thinners that will enter drains and waterways.
CLEANING OF EQUIPMENT
Clean immediately using solvent. Hardened product can only be removed mechanically.
Find the right product for you
Contact Us
Do you want to know more about our products and how we can help you? Leave your contact details here, and we’ll get in touch.
Alternatively, you can call us anytime on