ALKACRETE 255
3-Component, 100% Solid , Chemical resistant, Food Grade Cementitious SystemPolyurethane Cementitious System
AlkaCrete 255 is a high-performance, three-component, heavy-duty, HACCP-Approved industrial flooring system composed of a polyurethane resin, a polyol hardener, and a cementitious aggregate filler.
20Kg Kit for $000 including GST.
Usage
This product is designed to withstand extreme mechanical, chemical, and thermal stresses, making it ideal for environments such as food and beverage processing plants, commercial kitchens, pharmaceutical facilities, and other heavy-duty industrial areas.
Where it could be used:
– Food and beverage production areas
– Commercial kitchens and freezers
– Pharmaceutical processing plants
– Breweries and dairies
– Heavy-duty industrial warehouses
– Chemical processing areas
– Cold storage facilities
– Packaging plants
Advantages
- Good workable time,
- Excellent bond strength even to the damp concrete,
- Easy application/Can be applied by brush or roller,
- VOC Free, 100% Solid,
- Low permeability,
- Excellent adhesion,
- Good mechanical resistance,
- very good chemical resistance.
Packaging
Pre-portioned 20 Kg kit.
Colour
– AlkaCrete Colour Chart.
Shelf life: 12 months
Storage conditions
Store away from direct sunlight and away from naked flames, sparks and heating.
Flash point >25 C
Density: 1.4 Kg/L
Layer thickness
Recommended coating thickness is approximately 160-200 microns per coat
Pot Life (at 25 C)
approximately 15-20 minutes
Curing time (at 25 C)
Tack free time: 4-7 hours
Re-coat able: 12-24 hours
Light traffic: 3 days
Full cure: 7 days.
APPLICATION INSTRUCTIONS
Part A and Part B must be mixed together first for a minimum of 2 minutes. Then, mix part C (powder) with these two parts for at least 5 minutes. Once the mixing is done, the compound can be applied with a trowel and/or notched squeegee to a thickness of 3-6 mm in order to reach a smooth surface. Alternatively, aluminium oxide or bauxite could be broadcast while applying to be able to reach 6-9 mm of thickness and a R9 to R13 non-slip floor rating.
After application and for the cleaning process, water can be used for cleaning tools and equipment before the mixed compound begins to harden. Once cured, it must be removed mechanically.
CLEANING OF EQUIPMENT
Xylene can be used for cleaning tools and equipment before the mixed compound begins to harden. Once cured, it can only be removed mechanically.
Find the right product for you
Contact Us
Do you want to know more about our products and how we can help you? Leave your contact details here, and we’ll get in touch.
Alternatively, you can call us anytime on