1300 51 51 50

ALKA 211

1-Component, UV-Resistant, Moisture-Cure Polyurethane Topcoat

Single Pack PU Topcoat

Alka 211 is a one-component, solvent-based, high chemical and UV-resistant, moisture-cure, polyurethane topcoat designed for use over concrete floor coatings and waterproofing membranes. Alka 211 is a trafficable topcoat that is UV-resistant and has been tested to pass accelerated UV testing using UVB light at 2000 hours.

alka 211

10L / 10Kg Kit

Log in to Your Trade Account

Usage

As a clear topcoat for :

  • Decorative Flake systems,
  • Epoxy self-leveling floor toppings,
  • Exterior and interior decorative flooring finishes.
  • Metallic floorings or Liquid Marbles.

Advantages

  • Extremely bright, clear, and transparent.
  • Low viscosity.
  • Exceptionally Tough & Durable,
  • Excellent bond strength.
  • Easy application/Can be applied by brush or roller.
  • Multi-purpose use.
  • Ultra-High solids as supplied.
  • Protects new concrete from abuse.
  • Rejuvenates worn surfaces to a smooth finish.
  • Designed to take heavy loads.
  • Available in bulk quantities.
  • Good mechanical resistance.
  • Good chemical resistance.
  • Short waiting times before subsequent coatings.

Packaging

10 Kg

Colour

– clear & transparent.

Shelf life: 9 months

Storage conditions

Store away from direct sunlight and away from naked flames, sparks, and heating.

Flash point >25 C

Density: 1.04 Kg/L

Pot Life (at 25 C)
approximately 1 hour

Curing time (at 25 C)
Touch Dry Time: 12 hours
Re-coatable: 12-36 hours
Light traffic: 3 days
Full cure: 7 days.

APPLICATION INSTRUCTIONS

1 coat of 250-400 g/m2 will provide a durable layer of 0.15-0.25 mm. Final dry film thickness must be a minimum of 0.2 mm (200 micron). The number of coats will depend on the degree and type of traffic. For light foot traffic, a single coat at 400 g/m2 is recommended.
For heavy foot traffic and vehicular traffic, two coats of 400 g/m2 are recommended. 

Alka 211 can be applied by brush, roller, spray, or squeegee.

CLEANING OF EQUIPMENT
Xylene can be used for cleaning tools and equipment before the mixed compound begins to harden. Once cured, it can only be removed mechanically.

pdf  ALKA 211 | Product Data Sheet | PDF-167 KB (English)

pdf  ALKA 211 | Safety Data Sheet | PDF-167 KB (English)

Find the right product for you

Explore all Coating products

Contact Us

Do you want to know more about our products and how we can help you? Leave your contact details here, and we’ll get in touch. 

Alternatively, you can call us anytime on

Tel: 1300 51 51 50